User module »DVI-CON-Video«
Target and user modules ·
103
Start-up
Start the user module by pressing the
Main Power
button of the power pack.
Status displays
Front panel
The LEDs on the front panel of the user module show the system’s operating status.
ADVICE:
The active hotkey configuration is displayed during the
System Startup
of
the matrix switch.
Section
LED
Status
Meaning
Power
Red.
On
The optional power pack is connected and the required voltage
(12 Volt) is available.
Off
The optional power pack is not (properly) connected.
Main
On
The main power supply provides the required voltage.
Off
The power button is turned off or the connection with the
mains could not be established.
Check the proper connection of the power supply cable.
Status
Trans.
On
The communication with the matrix switch could be estab-
lished.
Off
The communication with the matrix switch could not be estab-
lished.
System
On
The device is booting or carries out a firmware update.
Blinking
The system is ready for operation.
Console Video
On
Stable image signal at video input.
Off
The incoming video signal could not be detected or it lacks the
required quality to be processed by the system.
Active
On
A local keyboard was found.
Off
No power at PS/2 interface or USB bus.
Blinking
The CPU input (PS/2 or USB) is active and ready.
No local keyboard was found.
Trans.
System
Status
Main
Red.
Power
Console
Video
Active
Service
Summary of Contents for DP-CON
Page 123: ...NOTES...
