Guldmann GH1 F, Service Manual

Page: 90 / 168

J1
© Guldmann
GB/US
-09/2016 •
#550376_3
92
SERVICE AND
REP
AIR
IR remote control
Setting the IR-receiver
The IR-receiver is also available for use with Switch track,
Combi-lock, Turn- table and Transverse drive motor for
Guldmann rail systems . The IR remote control is by
Guldmann set to control all additional products by pressing
key no . 5 .
If the rail system includes more products from Guldmann,
and they should be controlled by each their key, the IR-
receiver can be set to control each product independently,
however only up to 6 products .
IR-receiver for Switch track, Transverse drive motor
and Turntable
Do the following on each of the IR-receivers:
Key no . 5: The wire mounted in pos . 6 is standard
Key no . 6: The wire mounted in pos . 6 is moved to pos . 7
Key no . 7: The wire mounted in pos . 6 is moved to pos . 8
Key no . 8: The wire mounted in pos . 6 is moved to pos . 9
Key no . 9 and 10 implies that only this IR-receiver is set to
channel 2 (Ch . 2) .
Key no . 9: The wire mounted in pos . 6 is moved to pos . 8
Key no . 10: The wire mounted in pos . 6 is moved to pos . 9
Channel 1 on IR-receiver
Key/Function Terminal on plug
for IR-receiver
VCC 24V 1
Key no. 1 (Up) 2
Key no. 2 (Down) 3
Key no. 3 (Left) 4
Key no. 4 (Right) 5
Key no. 5 6
Key no. 6 7
Key no. 7 8
Key no. 8 9
GND 10
Channel 2 on IR-receiver
Key no. 9 8
Key no. 10 9
IR-receiver
Plug for IR-receiver on J1