Guldmann GH1 F, Service Manual

Page: 102 / 168

1
2
1
2
© Guldmann
GB/US
-09/2016 •
#550376_3
104
SERVICE AND
REP
AIR
Push and release the bearing (1) – it shall move easily both
ways .
Check that the latch (tongue) is in the right position (2) . The
measurement from rail end to the U-shaped cutout shall be
between 12 – 14 mm (
1
/
2
inch)
.
Push and release the bearing – it shall move easily both
ways .
Check that the safety lock does not show signs of being
damaged or bent and that it is free of corrosion .
Check the distance between the rails (1), it must be
between 2 – 3 mm . The distance between sensor and metal
stand must have the same distance between 2-3 mm .
Check that the rails are at the same level (2) . Because of
deflection, we recommend that the traverse rail is installed
½ -1 mm higher than the fixed rail .
Combi lock 3