14
Note: the description on reciprocating mode is only applicable
for the device that has reciprocating mode.
3 Motor alone mode
3.1 Base start and stop
3.1.1 starting: If power off, press and hold the POWER button for
several second, welcome screen will appear.
3.1.2 shutdown: When power on, press and hold the POWER button
for 1 second, the screen slowly get dark, and the device shutdown.
3.2 Starting and stop of motor handpiece
3.2.1 When the motor handpiece is power off, press the ON/OFF
button, if the LED of motor handpiece button is blue, indicating that the
motor handpiece in power-on state.
3.2.2 After the base is powered on, in the power-on state of
handpiece, if the base wireless communication connection icon
is
lit, the motor handpiece had established wireless communication with the
base. When the ON/OFF button is pressed, the motor handpiece would
enter the working state according to the current mode set in the base.
3.2.3 Long press the ON/OFF button, and the handpiece will turn off.
3.3 Auto reversing protection mode
3.3.1
AUTO REVERSING
During operation, if the load exceeds a preset value, the needle
rotation mode file automatically becomes reverse mode. When the
load again lower than the preset value, the file returns to the needle
rotationally forward mode.
AUTO REVERSING mode is only effective continuous forward
Summary of Contents for Endo Radar Plus
Page 1: ...Endo Radar Plus Endo Motor INSTRUCTION MANUAL ...
Page 13: ...11 2 8 LCD screen ...
Page 45: ...ZMN SM 064 V1 2 20200622 ...
