Introduction
Welcome to the Artemis Mk6 Installer’s Guide. It explains how to install the Artemis
control software onto a Type 3 Marine Processor or other type of computer, and how
to use it to configure the Artemis system.
For instructions on how to use Artemis, please see the Artemis Mk6 Operator’s Guide
(Doc No. 94-0440-4).
The
on page 6 provides an introduction to the Artemis system.
The
section on page 8 describes possible arrangements of the
system on board a vessel.
on page 12 takes you through the
installation of the Mobile Station, Fixed Station and Beacon, as appropriate.
The
section on page 27 gives information for mounting
a Marine Processor supplied by Guidance Marine and how to upgrade the Artemis
control software, if required.
The
Configuring the Artemis System
section on page 30 explains how to configure
the system for your vessel.
5
Summary of Contents for Artemis Mk6
Page 54: ......
