Using the Artemis Service Interface
The Service Interface is a tool for configuring the Artemis system.
To open the Service Interface
1. Ensure that the Antenna Unit is powered on and connected to the control computer.
2. Double-click on the Service Interface icon:
(Alternatively, run from the Start menu:
Start > All Programs > Guidance Marine Ltd > Artemis > Artemis Service Interface
)
Screen Layout of the ASI
The upper part of the ASI window contains fields relating to communications, as follows:
Artemis Manager
- The state of the connection between the ASI and the Artemis Manager
(“Connected” or “Not Connected”).
Take Command / Relinquish Command
- This button allows the user to toggle the command
mode of the ASI between In Command and Monitoring.
In Command Indicator
- This red block symbol is visible when the ASI is In Command mode.
Sensor
- The state of the connection between the Artemis Manager and the sensor (“Connected”,
“Not Connected” or “Unknown”).
Validator
- Shows whether an Artemis Validator unit is connected to the Manager (“Connected” or
“Not Connected”).
The remainder of the CSI screen is occupied by one of several tab areas.
31
Summary of Contents for Artemis Mk6
Page 54: ......
