5.4 Use the machine.........................................................................................................................22
5.5 Stop the machine........................................................................................................................22
5.6 Transport the machine................................................................................................................23
5.7 Use the panic bar in case of an emergency............................................................................... 23
5.8 Release the panic bar.................................................................................................................23
6 Preventive maintenance......................................................................... 25
6.1 Preventive maintenance schedule..............................................................................................25
6.2 Do a functional test of the panic bar........................................................................................... 25
6.3 Do a detection test of the output.................................................................................................26
6.4 Clean the machine......................................................................................................................26
6.5 Do a check of the tension of the belts.........................................................................................26
6.6 Replace the air filter....................................................................................................................27
6.7 Fill the engine with oil................................................................................................................. 27
6.8 Lubricate the bearing housing.................................................................................................... 28
6.9 Replace the belts........................................................................................................................ 28
6.9.1 Remove the cover...........................................................................................................29
6.9.2 Remove the belts............................................................................................................ 29
6.9.3 Install the belts................................................................................................................ 29
6.9.4 Adjust the tension........................................................................................................... 30
6.9.5 Do a check for correct operation.....................................................................................30
7 Corrective maintenance.......................................................................... 32
7.1.1 Lock the rotor.................................................................................................................. 32
7.1.2 Remove the blades......................................................................................................... 32
7.1.3 Turn the blades............................................................................................................... 33
7.1.4 Sharpen the blades.........................................................................................................33
7.1.5 Install the blades............................................................................................................. 34
7.1.6 Adjust the gap................................................................................................................. 34
7.1.7 Finish.............................................................................................................................. 35
7.2 Do maintenance on the engine...................................................................................................35
7.3 Remove a blockage.................................................................................................................... 35
7.3.1 Do a visual check............................................................................................................35
7.3.2 Remove the output..........................................................................................................35
7.3.3 Remove the input............................................................................................................36
7.3.4 Remove the blockage..................................................................................................... 37
7.3.5 Use the rotor deblocking tool.......................................................................................... 37
7.3.6 Finish.............................................................................................................................. 38
Contents
4
D09-GS13S50-
1
2
