7
Corrective maintenance
Note:
Do the corrective maintenance procedures as required, or to solve a possible
problem.
7.1
Do maintenance on the blades
Warning:
•
Speak to your dealer for these procedures.
•
Always wear cut resistant gloves when you do work on the blades.
7.1.1
Lock the rotor
Preliminary requirements
1.
The machine is stopped.
2.
The input is removed.
3.
The output is removed.
•
M12x30 locking bolt for the
rotor
•
Flat-head screwdriver
•
Wrench size 19
Procedure
1. Make sure that you see the blades in
the shredderbox.
2. Remove the plug (A).
3. Install the locking bolt (B) to lock the
rotor.
7.1.2
Remove the blades
Preliminary requirements
1.
The rotor is locked.
•
Wrench size 17
A
B
Corrective maintenance
32
D09-GS13S50-
1
2
