Procedure
1. Remove the bolts (A) and the
washers (B).
2. Tilt the input (C).
3. Remove the hinges (D) from the
holes (E).
4. Remove the input.
7.3.4
Remove the blockage
Procedure
1. Remove all material from inside the input and the output.
2. Remove all material on top of the rotor.
3. Use the rotor deblocking tool to remove wood chips from the rotor. Refer to section
.
7.3.5
Use the rotor deblocking tool
Preliminary requirements
•
Rotor deblocking tool
•
Wrench size 10
B
A
C
D
E
Corrective maintenance
D09-GS13S50-
1
2
37
