4
Installation
Note:
Use bumper support to make sure that the machine stays balanced during
installation.
4.1
Install the input
Warning:
Two persons are required to install the input. The input is heavy.
Preliminary requirements
•
Wrench size 13
Procedure
1. Lift the input (A).
2. Move the hinges (B) into the holes (C).
3. Tilt the input.
4. Make sure that the locking key (D)
correctly fits in the safety lock switch
(E).
5. Install the bolts (G) and the washers
(F).
A
B
C
D
E
F
G
Installation
18
D09-GS13S50-
1
2
