Procedure
1. Stop the machine. Refer to section
Warning:
Make sure that the engine
is still warm.
Note:
For the exact location of
the drain plug (B), refer to
the OEM documentation
of the engine.
2. Remove the drain plug (B).
3. Tilt the machine to drain all the engine
oil.
4. Install the drain plug (B).
5. Remove the fill plug (A).
6. Fill the reservoir until the oil reaches the indicator on the plug.
7. Install the fill plug (A).
6.8
Lubricate the bearing housing
Preliminary requirements
•
Grease pump
•
Universal grease
Procedure
1. Clean the grease nipple (A).
2. Add grease through the grease
nipple. Use the grease pump.
3. Remove excessive grease.
4. Repeat step 1 and step 2 for the
grease nipple at the other side of the
machine. Remove the belt cover for
6.9
Replace the belts
Caution:
Always replace the belts together.
B
A
A
Preventive maintenance
28
D09-GS13S50-
1
2
