WARNING –
To reduce the risk of
burns, electric shock, fire, or injury to persons:
1.
This appliance should never be left
unattended when plugged in.
Do not pull,
twist, or wrap line cord around appliance.
2. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended
purpose as described in this manual. Do not
use attachments not recommended by the
manufacturer. Do not use an extension cord to
operate this appliance.
4.
Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or
damaged, or dropped into water.
Return the
appliance to a service center for examination
and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any
opening on this appliance.
7. Do not place appliance on any surface while
it is operating.
8. Do not use this appliance with a damaged
or broken comb or with teeth missing from the
blades as injury may occur. Before use, make
certain blades are aligned properly.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Never operate the appliance with the
air openings blocked or while on a soft
surface, such as a bed or couch, where the
air openings may be blocked. Keep the air
openings free of lint, hair, and other debris.
11. Always attach plug to appliance first, then
to outlet. To disconnect, turn all controls to
OFF, then remove plug from outlet.
12. Avoid skin coming into contact with
moving blade.
13. When using the appliance with its cord,
be mindful of tangles or kinks in the cord. If
the cord does become tangled during use,
turn the unit off and straighten cord before
operating again.
14. Do not short the polarity (output cord) –
ensure jack is plugged into the unit before
plugging the adapter into outlet.
15. This power unit is intended to be correctly
oriented in vertical floor mount position.
16. CAN ICES-3(B).
WARNING:
Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
USER MANUAL
Before using the Class 2 Power Supply, read
these instructions carefully.
Rated input voltage:
100–240V AC, 50/60Hz,
0.2A Max
Rated output:
4.5 VDC, 1000mA
OPERATION
1. For dry location use only. Do not expose to
water.
2. When not in use, unplug unit completely.
3. Unit will become warm during operation.
CAUTION
1. Dry location use only. Do not expose to liq-
uid, vapor or rain.
2. Ensure jack is plugged into the trimmer unit
before plugging the adapter into the outlet.
3. Do not operate any appliance that has a
damaged output cord or housing.
4. Always unplug the unit before cleaning or
when not in use.
5. This power unit is intended to be correctly
oriented in a vertical or floor mount position.
6. Be sure voltage is in correct voltage before
plugging in.
FEATURES
• Cord or cordless operational clipper – use
corded for continuous power while plugged
into the outlet or use cordless for total flexibility
and control.
• Lithium-ion technology with lightweight DC
motor for powerful cutting action and sustained
power performance.
• Precision-engineered high-grade hardened
steel blades with unique super-sharp cutting
angle for smooth, effortless cutting.
• Lightweight for easy handling during use.
• Taper control for custom settings.
• 3-hour full charge for approximately 75
minutes of use.
• 20-minute quick charge for approximately
10 minutes of use.
Also included are 10 comb attachments for
different hair lengths (including left and right
ear taper combs), barber scissors, a barber
comb with straight teeth, styling comb with
angled teeth, a full-length barber cape, and a
deluxe case for easy storage. It also comes
with lubricating oil, a cleaning brush and a
blade guard for easy maintenance and
protection of the clipper blades.
INSTRUCTIONS
FOR USE
CHARGING THE APPLIANCE
IMPORTANT
Use only the adapter supplied with this
appliance. This clipper is easy to use, but
before you do anything you must take your
time to charge the unit for 3 hours before its
first use. Even if you want to use it plugged in
straight from an outlet, this initial supercharge
ensures optimum power performance to give
smooth, fast cutting every time.
Maximum
battery capacity will be reached only after
3 charging/discharging cycles.
A full
charge will provide approximately 75 minutes
use. When the clipper is about to run out of
power, the charging indicator will flash and
you will have approximately 3 minutes of use
remaining. A 20-minute quick charge will
provide approximately 10 minutes use.
The red LED light will go on when charging the
appliance and the green LED light will go on
when fully charged.
WARNING:
If the charging light suddenly starts
to flash rapidly, the appliance is faulty. If this
happens, please stop charging and remove the
adapter from the outlet and contact our
Customer Care Center for further advice (see the
Warranty section of the information booklet).
CORDED OPERATION
• Ensure the appliance is switched off.
• Connect the adapter to the base of the
appliance and plug the adapter into a suitable
outlet.
• The red LED charging light will go on when
the adapter is correctly inserted into the
appliance and connected to an outlet.
• The appliance is now ready for use.
CORDLESS OPERATION
• Insert the adapter into the base of the
appliance, plug into a suitable outlet.
• Unplug the adapter from the outlet once the
green LED charging light goes on, as the
appliance is now fully charged.
OILING INSTRUCTIONS
IMPORTANT!
It is highly recommended before
each use to oil the blades with the oil provided.
This ensures optimum cutting performance.
For the first use you will need to use the oil
supplied with the product. Unscrew the cap
and cut off the very end of the plastic tube with
a pair of scissors to release the oil.
To oil the blades ensure that the unit is
switched on. Gently squeeze the oil tube and
apply 2 drops of oil to the blades (see FIG. 1, 2,
and 3). Leave the unit on for a few seconds to
allow the oil to thoroughly spread the length of
the blades. Switch off the unit and remove any
excess oil by gently dabbing with a cloth.
Be careful not to use too much oil and don’t oil
PRESERVING THE BATTERIES
In order to maintain the optimum capacity of the
rechargeable batteries, the appliance has to be
fully discharged approximately every 6 months.
Then recharge the appliance to full capacity,
again for 3 hours.
THE CONAIR GUIDE TO CUTTING
HAIR AT HOME
Before you start:
1. Inspect your clipper. Make sure it’s free of hair
and dirt, properly oiled and running smoothly.
2. Place a towel around the neck of the person
whose hair is to be cut.
3. Seat the person so that his or her head is at
your eye level. This gives you greater visibility
and control.
4. First, comb hair until it’s tangle-free. Then
hold clipper in a comfortable grip. Now you’re
ready to cut.
MEDIUM TO LONG CUT
To begin, cut only a small amount of hair until
you become used to the length each attachment
leaves the hair. Try the longest attachment on
the clipper first. If you want a shorter cut, you
can then use shorter combs.
• Short comb attachment (number 1) cuts hair
to 1/8" (3mm).
• Medium-Short comb attachment (number 2)
cuts hair to 1/4" (6mm).
• Medium-Long comb attachment (number 3)
cuts hair to 3/8" (9.5mm).
• Long comb attachment (number 4) cuts hair to
1/2" (12.5mm).
• Long comb attachment (number 5) cuts hair to
5/8" (16mm).
• Long comb attachment (number 6) cuts hair to
3/4" (19mm).
• Long comb attachment (number 7) cuts hair to
7/8" (22mm).
• Long comb attachment (number 8) cuts hair to
1" (25mm).
• Left ear comb attachment lightly tapers over
left ear.
• Right ear comb attachment lightly tapers over
right ear.
your clipper more than necessary, as this could
damage the motor. (Never attempt to oil the
motor bearing, as it is permanently lubricated.)
KEEP OIL OUT OF REACH OF CHILDREN.
Attach combs by
holding them teeth
up, then snapping
onto the bottom of
the clipper blade.
To remove comb
attachments, place
index finger and
thumb as illustrat-
ed; then pull out
and up.
NOTE:
Never push or shove the clipper
through the hair to make it move more
quickly. Professional experience shows
that the clipper works most efficiently
when it cuts through the hair at its own
speed.
To begin cutting hair:
1. The hair should be
combed in its natural
direction.
2. Using the largest
comb attachment, trim
sides from the bottom
upward. Hold clipper
lightly against the hair
with teeth of the comb
attachment pointing
up ward, yet flat against
the head. Gradually lift
the clipper upward and
outward through the hair,
trimming just a little at
a time.
Repeat around sides and
back of head.
If you want hair to be
even shorter:
A) Apply more pressure to
the head with the comb
attachment that is in
place. This takes a little
practice, of course.
OR
B) Just switch to a shorter
comb attachment.
OIL BOTH AREAS
OIL BOTH AREAS
FIG. 1
FIG. 2
FIG. 3
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, take basic safety
precautions, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
FOR HOUSEHOLD USE ONLY
DANGER –
any appliance is electrically
live, even when the switch is off.
To reduce the risk of death or injury by electric
shock:
1.
Unplug this appliance before cleaning.
2. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
3. Do not use while bathing or in a shower.
4. Do not place in, or drop into water or other
liquids.
5. Do not reach for an appliance that has
fallen into water.
Unplug immediately.
For
dry location use only. Do not expose to liquid,
vapor or rain.
6. Except when charging, always unplug this
appliance from electrical outlet immediately
after using.
