Procedure
1. Sharpen the blade (A) to a maximum
of 0.5 mm.
2. Make sure that you comply with the
indicated angles.
3. Install the blade. Refer to section
7.1.5
Install the blades
Preliminary requirements
•
Torque wrench
•
Blade (2x). Refer to the spare
parts list for the exact type.
•
Loctite 243
•
Wear cut resistant gloves.
Procedure
1. Put on cut resistant gloves.
2. Clean the surface of the blade and
the blade holder.
3. Install the blade (A).
4. Apply Loctite 243 to the bolts (5x) (B).
5. Install the bolts. Apply a torque of 80
Nm.
6. Do a check if the gap (C) between the
blade and the counter blade is 0.5
mm.
7. If necessary, adjust the gap. Refer to
section
.
8. Repeat the procedure for the second
blade.
7.1.6
Adjust the gap
Preliminary requirements
•
Allen wrench size 8
A
5
2.5 mm
o
30
o
B
C
A
A
Corrective maintenance
34
D09-GS13S50-
1
2
