GSK928TE
Ⅱ
Turning CNC System User Manual
55
Note
：
The operation of single block stop is valid when the program is running in AUTO
(Continuous) Run mode, and pressing key is invalid when the program is running in
AUTO
Single mode. When executing the canned cycle commands, the operation of
single block stop is valid after finishing each step of the canned cycle.
●
Modifying offset
In
AUTO
mode, modify the offset, but cannot modify that of the current machining run.
Modify the offset value in automatic run:
In automatic run, the offset value can be modified. When the offset value which corresponds
to the current tool offset number is modified, the modified value will be valid in the next
execution. When the tool offset value which corresponds to the unexecuted tool offset number,
the modified value is value in this execution. The operations are as follows:
①
Press
in automatic run, and the system switches to the modification offset
display window:
Press
again, and the system returns to
AUTO
mode, displaying the window
circularly.
②
Press
to select the required modification offset number, press “X”, “Z” to
select the required modification axis.
③
Input the data. When the input data directly replaces the previous,
is pressed.
Press
to modify the previous data. Press
to cancel the input data.
Note 1: In inputting the data, the system can be switched to the display window in
AUTO
mode
anytime, and switched the display window in
OFFSET
mode, and the previous input
data is still kept and you can continuously input the new.
Note 2: In inputting the data, the system automatically returns the display window in
AUTO
mode when the pause or end of program appears.
Note 3: In displaying the offset modification window, the pause, the modifying feedrate override
and other operations are valid in
AUTO
mode. The system can be switched to the
