GSK928TE
Ⅱ
Turning CNC System User Manual
49
2. After selecting the required block and pressing
, the system prompts “Run?” to wait the
next execution.
3. After pressing
with “Run ?”on the screen, the system will automatically traverse to the
starting point of selected block and start to execute the block. The system escapes from the
selected block and return to the first block after pressing
.
Press
to execute the program from the selected block.
Note 1
:
The specified block cannot be in canned cycles, compound cycle bodies or subprograms,
otherwise there is the unexpected run.
Note 2:
When using the coordinate system defined by G50 in the program, after power on, do not
run the program from the specified one before the system creates the coordinate system
by G50, otherwise there is a mistake run.
Note 3:
When
running the program from the specified block, the selected block should be for
executing linear movement or S. M. T. Ensure the coordinate of tool and system must be
placed on the starting point of arc, otherwise the machined circular arc may be not
qualified.
4.5.2.3 Single and (Continuous) Run Mode of a Part Program
Select Single mode to ensure the program is right after editing the part program.
The program will automatically execute one block by pressing
once, observing whether
the machine running is the same that of the expected to decide the next execution. Press
again to execute orderly the program until it ends. Halt the run and return to the program reference
point and modify the program until it is right if there are different between the expected run and the
actual one, and then select (Continuous) Run to execute the continuous machining.
Switch Single/(Continuous) Run by pressing .
Single and (Continuous) Run
z
Press
to switch Single/ (Continuous) Run without executing the part program, and
the selected run mode is displayed on the screen.
z
Press
to halt Single mode when the part program is continuously running, i.e. halt
executing the next one after executing the block. The system displays Halt in highlight on
the screen as Fig. 16. Press
to execute the continuous run not to switch to Single
mode. Press
to switch to Single mode after running the program (Halt in highlight
on the screen). Stop/cancel Single by pressing
in the course of the program running.
z
When the part program is being executed in Single mode, pressing
is invalid.
Note:
The initial run is in (Continuous) Run mode when the system enters AUTO mode.
