GSK928TE
Ⅱ
Turning CNC System User Manual
22
name to save. If the sent program name is the same as one in CNC system, the system
cannot display the program name content of the sent program name, and will display it if
the old one is deleted.
Note 2:
Send/receive part programs between 2 GSK928TE
Ⅱ
CNC systems according to the
above–mentioned methods. 2 CNC systems separately operate according to part
program input/output ways.
Note 3:
It must have the block number of part program when the part program is sent from PC to
CNC system, otherwise there is a mistake.
4.3.2.6 Deleting All Part Programs
Delete all programs once in the program memory area of CNC system.
Press
in the state of catalog search of part program.
Input
⑵
,
by keyboard.
Press
⑶
，
and the system prompts
Confirm
？
Press
⑷
to delete all part programs. Press other keys, and the system does not execute
the deletion and returns to
EDIT
mode.
Note: Press
and then
, release
and then
to delete all part program.
4.3.2.7 Renaming a Part Program
Rewrite the current program name to another one.
Press
⑴
, and the system displays
%
.
Input the program name which does not exist in the program name list, and press
⑵
to rewrite the current program name to the input program name.
Example: Rename the current program name %00 to % 05.
Press
to input
, and press
, so the renaming is
completed.
