GSK GSK928TE User Manual Download Page 3

Page: 3 / 187

GSK928TE

Ⅱ

Turning CNC System User Manual

Dear user,

We are really grateful for your patronage and purchase of GSK928

Ⅱ

Turning CNC

system made by GSK CNC Equipment Co., Ltd.

Caution

This system can only be operated by authorized and qualified personnel as

improper operations may cause accidents. Please carefully read this user

manual before use!

Before Use:

Connect the emergency stop button of the system firmly and correctly, otherwise an

emergency stop alarm will occur when switch on the system, so that the system cannot
work properly.

Set the reference point of the program of the system according to the actual mounting

position of the tool of the machine that the system controls.

Note: The power supply of the system installed in the cabinet is exclusive to GSK’

CNC systems.

Must not take the power supply as other uses, otherwise, there maybe

cause great accidence!

Chinese version of all technical documents in Chinese and English

languages is regarded as final.

All specifications and designs are subject to change without notice.

We are full of heartfelt gratitude to you for supporting us in the use of GSK’s

products.

Summary of Contents for GSK928TE




























































































































































































Search results

Summary of Contents for GSK928TE

Reviews:

Brands by name

Popular brands

GSK GSK928TE, User Manual

Search results

Summary of Contents for GSK928TE

Reviews:

Brands by name

Popular brands