GSK928TE
Ⅱ
Turning CNC System User Manual
24
Fig. 8 automatically creating block number and inputting program content
4.3.3.2 Inputting Content of Program
EDIT
mode of the CNC system is employed with the full screen. Inputting content of program is
executed in
EDIT
mode.
(1) Create a new program according to the creating method of new part program.
(2) After the block number
N0000
is displayed, input the content of one block by keyboard.
(3) Input completely one block and then press
.
(4) The system will generate the sequence number of next block and the content of program
should be input continuously.
(5) Input completely the last block and press
to end the input of content of program.
(6) The cursor rapidly moves in the block.
Press
once, and the cursor will point to the head of word; press it again
,
and the
cursor points to the head of block, and the above steps are executed circularly.
Press
once, the cursor points to the end of block.
(7) Insert a block in the first block.
Move the cursor to the head of the first block and then press
.
Note: There are 255 characters at most in one block. When the characters exceed the screen,
pressing
displays one character left.
4.3.3.3 Inserting a Block
Insert one or more blocks between two blocks.