31
PNEG-1421
Direct Gear Drive Bin Sweep Auger
OPERATION
Center well slide gate must be fully open during sweep operation.
16. Engaging the Clutch for Bin Sweep
Fig. 16
A. All power should be off and locked out before starting.
B. Loosen the Lock Collar Set Screw and pull on Clutch Control Handle to engage clutch. (See Figure 16)
C. Once engagement is felt tighten the Lock Collar Set Screw to hold the clutch engaged.
D. Fully open the
Center Well ONLY
.
E. Restore power and start the Power Sweep motor. The sweep auger will start along with the unload auger. The
sweep auger will remain on the floor and clear most of the grain in one pass. A second pass will clean out addi-
tional grain, before final clean out.
Summary of Contents for PNEG-1421
