12
Assembly Step 5:
Assembly Step 9:
Assembly Step 6:
Install the Middle post sleeve (part 17) onto the Middle post
(part 16) and secure it using the Middle post sleeve
tightening knob (part 18).
Install the Raising arm (part 41) (with Shoulder bar (part 33)
attached) onto the Middle post sleeve using the 50 mm bolt
and the Raising arm release pin (part 42). Do not screw in
the Raising arm release pin all the way – sufficient space
must be afforded to allow the Raising arm to be lowered
into a collapsed position and to be returned to the operating
position. The Release pin should be screwed in far enough
to avoid inadvertent collapse of the Raising arm.
Install the right and left Long handles (part 30) onto the
Shoulder bar (part 33) and secure using the Long
handle tightening knobs (part 28) insert the Shoulder
bar safety pins (part 27) on both ends of the Shoulder
bar (part 33).
41
30
33
27
17
50 mm bolt
18
Please note:
although the
Shoulder bar (part 33) and the
Raising arm (part 41) are depicted
above as separate parts, they are
factory pre-assembled and no
further assembly is required to
attach these parts together.
33
28
42
16
Summary of Contents for SFPro
Page 6: ...6 SFPro Parts List Diagram ...
Page 14: ...14 The SFPro fully assembled ...