GruuvGolf SFPro User Manual Download Page 11 | Manualshive

Page: 11 / 37

GruuvGolf SFPro User Manual Download Page 11

11

Assembly Step 3:

Assemble the Knee brace mount (parts 4, 5 and 6) using four 12 mm bolts with washers and
secure it to Platform rear piece (part 2) using four 35 mm bolts and washers. Install the Knee
brace (part 9) onto the Knee brace mount using the 40 mm bolt fastened with a nut (do not
over-tighten to allow for lateral movement of the Knee brace across the Knee brace mount).

Assembly Step 4:

9

11

4

5

6

2

16

12 mm bolts

35 mm bolts

60 mm bolt

A

B

40 mm bolt

8

Install the Middle post (part 16) inside the top of the Resistance band mount (part 8) and secure it first by
inserting a 55 mm bolt in the lower hole fastened with a nut and two washers; then insert the 60 mm bolt
into the Resistance band support tube (part 11) through the top hole of the Resistance band mount (A).

Rest the inside of the Resistance
band loops over the Resistance
band support tube (C). Ensure that
the Resistance bands are properly
aligned and do not cross over each
other once they are installed on
the Resistance band support tube.

55 mm bolt

«
...
9
10
11
12
13
...
»

Summary of Contents for SFPro






































Reviews:

No comments