GruuvGolf SFPro User Manual Download Page 10 | Manualshive

Page: 10 / 37

GruuvGolf SFPro User Manual Download Page 10

10

Assembly Step 1

A)

Turn the Platform rear and front pieces (parts 2 and 3) upside down and secure them together using
a 50 mm bolt fastened with a nut and two washers for each of the three holes.

B)

Insert the two Platform mounts (Part 1) into the slots in the assembled front and rear Platform
pieces from step A. Secure the Platform mounts using 12 mm bolts and a washer for each of the
eight holes (four per mount). You must ensure that the portion of the platform mounts that is away
from the platform has the side holes facing towards the inside. Install the platform mount rear cross
piece (part 7) between the two platform mounts as shown using a 12 mm bolt and a washer for
each of the four holes.

A)

B)

Assembly step 2:

2

3

1

7

1

8

10

0

50 mm bolts

Holes towards the inside

55 mm bolt
bolts

7

55 mm bolts

Attach the Resistance band mount (part 8) to the Platform mount rear crosspiece (part 7) using 55 mm
bolts fastened by nuts and washers. Install the Diagonal support braces (part 10) to the Resistance
band mount (part 8) using a 55 mm bolt and to the Platform mounts using 12 mm bolts and washers.

12 mm bolts

12 mm bolts

12 mm bolts

«
...
8
9
10
11
12
...
»

Summary of Contents for SFPro






































Reviews:

No comments