Protect a file by setting the HDD property to “Read-only”:
Steps:
1. Enter the HDD setting interface: Menu> HDD
2. Click on the “(pencil on a written sheet)” button to edit the HDD you want to protect.
NOTE: To edit the HDD property, you need to set the storage mode of the HDD to “Group”. See Chapter “Managing
a HDD Group”.
3. Set the HDD property to “Read-only”.
4. Click “OK” to save the settings and to go back to the upper level menu.
NOTE:
- You cannot save any files on a Read-only HDD. If you want to save files on the HDD, change the property to
“R/W”.
- If there is only one HDD and it is set to “Read-only”, the NVR/DVR cannot record any
fi
les. Only live view mode
is then available.
- If you set the HDD to “Read-only” when the NVR/DVR is saving
fi
les on it, then the
fi
le will be saved on the next
R/W HDD. If there is only one HDD, the recording will be stopped.
58
English
