8.8. Configuring the HDD Group for Recording
You can group the HDDs and save the recording files in a certain HDD group.
Steps:
1. Enter the HDD setting interface: Menu> HDD
2. Select “Advanced” on the left side menu.
Check whether the storage mode of the HDD is “Group”. If not, set it to “Group”. For detailed information, please
refer to Chapter “Managing a HDD Group”.
3. Select “General” in the left side menu.
4. Click on the “(pencil on a written sheet)” button to enter the editing interface.
5. Con
fi
guring the HDD group:
1) Choose a group number for the HDD group.
2) Click “Apply” and then in the pop-up message box, click “Yes” to save your settings.
3) Click “OK” to go back to the upper level menu.
Repeat the above steps to configure more HDD groups.
6. Choose the Channels for which you want to save the recording
fi
les in the HDD group.
1) Select “Advanced” on the left bar.
2) Choose a Group number in the dropdown list of “Record on HDD Group”.
3) Check the channels you want to save in this group.
4) Click “Apply” to save the settings.
56
English
