3. Con
fi
gure the following settings:
- Language: The default language used is English.
- Resolution: Select the resolution for the video output, which must be the same as the resolution of the monitor
screen.
- Time Zone: Select the time zone.
- Date Format: Select the date format.
- System Date: Select the system date.
- System Time: Select the system time.
- Mouse Pointer Speed: Set the speed of the mouse pointer; 4 levels are con
fi
gurable.
- Enable Wizard: Enable/disable the Wizard when the device starts up.
- Enable Password: Enable/disable the use of the login password.
4. Click the “Apply” button to save the settings.
16.3. Con
fi
guring the DST Settings
Steps:
1. Enter the General Settings interface: Menu > Con
fi
guration> General
2. Choose the “DST Settings” tab.
You can check the checkbox in front of the Auto DST Adjustment item. Or you can manually check the “Enable
DST” checkbox, and then you choose the date of the DST period.
16.4. Con
fi
guring More Settings for the Device Parameters
Steps:
1. Enter the General Settings interface: Menu> Con
fi
guration> General
2. Click the “More Settings” tab to enter the More Settings interface, as shown in below.
3. Con
fi
gure the following settings:
- Device Name: Edit the name of the NVR/DVR.
- Device No.: Edit the serial number of the NVR/DVR. The Device No. Can be set in the range of 1~255, and the
default No. Is 255. The number is used for the remote and keyboard control.
- Auto Logout: Set the timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes, then the
system will exit from the current operation menu to change to the live view screen after 5 minutes of menu
inactivity.
- Menu Output Mode: You can choose that the menu display is on a different video output. By default, only
HDMI/VGA is selectable.
4.Click the “Apply” button to save the settings.
120
English
