NOTE:
- To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video Content Analysis)
triggered recording and capture, you must configure the motion detection settings, alarm input settings or VCA
settings as well. For detailed information, refer to Chapter 8.1, Chapter 8.2 and Chapter 8.5.
- The VCA settings are only available to IP cameras that are supporting these functions.
Repeat the above edit schedule steps to schedule the recording for other days in the week. You can click “Copy”
to enter “Copy to interface” to copy the schedule settings to other days.
V. Click “Apply” in the Recording Schedule interface to save the settings.
Draw the schedule:
I. If you click on the colour icons, you can choose the schedule type as "Continuous" or "Event".
Descriptions of the colour icons are shown in the figure below.
49
English
