7. PTZ Controls
7.1. Con
fi
guring the PTZ Settings
The purpose of this function is to follow the procedure to set the parameters for PTZ. The configuring of the PTZ
parameters should be done before you control the PTZ camera.
Please note: Only cameras using Grundig-1 protocol make use of all the PTZ functions. Cameras using Grundig-
2, ONVIF or any other protocol might need to be configured directly in the camera OSD.
Steps:
1. Enter the PTZ Settings interface: Menu >Camera> PTZ
2. Click the RS-485 Settings button to set the RS-485 parameters.
3. Choose the camera for PTZ setting in the “Camera” dropdown list.
4. Enter the parameters of the PTZ camera.
NOTE: All the parameters should be exactly the same as the PTZ camera parameters.
5. Click the “Apply” button to save the settings.
7.2. Setting the PTZ Presets, Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.
38
English
