3. Enter the destination address in the text
fi
eld of “Destination Address”.
4. Click the “Test” button to start testing network delay and packet loss. The testing result pops up on the
window. If the testing failed, the error message box will pop up as well.
12.4.2. Exporting the Network Packet
By connecting the NVR/DVR to the network, the captured network data packet can be exported to a USB-flash
disk, eSATA and USB - DVD-R/W.
Steps:
1. Enter the Network Traf
fi
c interface: Menu> Maintenance> Net Detect
2. Click the “Network Detection” tab to enter the Network Detection interface.
3. Select the backup device from the dropdown list of “Device Name”.
NOTE: Click the “Refresh” button if the connected local backup device cannot be displayed. When it fails to detect
the backup device, please check whether it is compatible with the NVR/DVR. You can format the backup device if
the format is incorrect.
4. Click the “Export” button to start exporting.
5. After the exporting is complete, click “OK” to
fi
nish the packet export, as shown below.
NOTE: Up to 1M of data can be exported each time.
101
English
