Cleaning, inspection, maintenance
52 | 76
BA_TD
3-
BS
00
0en
_07
4_sof
tli
Q
-S
C
.docx
No water may drip from the flushing water hose during operation. The system
is in operation when the blue symbol is displayed in information level 1 (refer
to chapter 7.1.1).
8.3
Maintenance
Some regular work is necessary in order to ensure the proper functioning of the product in
the long term. For this purpose, DIN EN 806-5 recommends a semi-annual and an annual
maintenance.
8.3.1
Semi-annual maintenance
In order to carry out the semi-annual maintenance, proceed as follows:
1.
Check the soft water hardness (refer to chapter 7.4).
2.
Check that there are sufficient salt tablets in the brine tank.
The level of salt tablets in the brine tank must always be higher than the
water level.
3.
Evaluate the salt consumption subject to the water volume consumed.
4.
Check the state of the salt (no salt clumps!).
Break up incrustations with a suitable tool.
8.3.2
Annual maintenance
Carrying out annual maintenance work requires specialist knowledge. This kind of
maintenance work may only be carried out by Grünbeck's technical service/authorised
service company or by specialist installers trained by Grünbeck.
In addition to the semi-annual maintenance, the following work needs to be done:
Operating values
5.
Measure the raw water hardness.
6.
Set the measured raw water hardness in the control unit.
7.
Measure the soft water hardness.
8.
Readjust the blending valve, if necessary, and check the soft water hardness.
9.
Read off the water and flow pressure.
10.
Read off the residential water meter.
Summary of Contents for softliQ:SC
Page 1: ...We understand water Water softener softliQ SC Operation manual...
Page 72: ...Notes 72 76 Notes...
Page 75: ......
