Start-up
40 | 76
BA_TD
3-
BS
00
0en
_07
4_sof
tli
Q
-S
C
.docx
9.
Select "Start-up START".
10.
Confirm with ENTER.
11.
Continue with chapter 6.1.3.
6.1.2
Manual start of the start-up program
If required, start the start-up program manually from the menu level.
Status level>Menu level>Start-up
1.
Confirm with ENTER.
2.
Press and hold the ▲ and ▼ buttons for 2 seconds.
6.1.3
Course of the start-up program
Use the ▲ or ▼ button to navigate through the program.
1.
Do not fill any water into the brine tank.
2.
Fill salt tablets into the brine tank (refer to chapter 7.8).
3.
Determine the raw water hardness. You have the following options to do so:
● Contact your water supply company and ask them what the value is.
● Determine the value by using the water test kit supplied with the system
(refer to chapter 7.4).
4.
Use ▲ and ▼ to set the value for the raw water hardness.
Confirmation is only possible if the system has completed the previous step.
This is the case when the ENTER button lights up. The value can be
changed later (refer to chapter 7.6).
5.
Confirm with ENTER.
Summary of Contents for softliQ:SC
Page 1: ...We understand water Water softener softliQ SC Operation manual...
Page 72: ...Notes 72 76 Notes...
Page 75: ......
