Grunbeck Delta-p, Operation Manual

Page: 33 / 74

Start-up
33 | 74
BA_
T
D
3-
BM
001e
n_
01
4_D
el
ta-
p.docx
6.2 Adjusting the water softener Delta-p
This subchapter describes the adjustment of the electronically controlled blending valve of
the water softener Delta-p.
The blending valve is
not part of the water softener Delta - p - I . It can be retrofitted to the
water softener Delta - p - I if required. Contact Grünbeck's technical service-/authorised
service company beforehand.
The water softeners Delta-p are controlled by quantity. The operating parameters are
already stored in the GENO-IONO-matic
3
control unit. During start-up, all parameters must
be entered which are required for the automatic calculation of the regeneration interval.
Check the factory-set data record.
The GENO-IONO-matic
3
control unit is operated via buttons (refer to chapter 4.3).
Perform the settings according to chapters 7.3 to 7.5.
6.3 Handing over the operation manual to the operator
Inform the owner/user about the need for inspections and maintenance.