Grunbeck Delta-p, Operation Manual

Page: 19 / 74

Control unit
19 | 74
BA_
T
D
3-
BM
001e
n_
01
4_D
el
ta-
p.docx
Control unit GENO-IONO-matic
3

Button
 In the status level :
Triggers regeneration by hand. (> 5 s press)
In the Menu level User :

Returns to the previous parameter.

Decreases numerical values.
 Button 
In the status level :

Calls up the Information menu level.

Advances the display.
In the Menu level User :

Switches to the next parameter.

Increases the numerical values.
4.3.2 Select menu level
Control unit GENO-IONO-matic
3
Objective Step
Status level
► Press the button  and the button  at the same time.
Information menu
level
► Press the button  in the status level. 1x - 11x, rotating
through the display back to the basic display.
Menu level User
► Press the P button in the status level for more than 5°s
Menu level
Programming
1. Press the P button and the  button in the status level
at the same time for more than 1 s.
» The display switches from time to the three flashing
digits "000", preceded by a "C".
2. Press the  or the  button to select code 290.
3. Press the P button to confirm your selection.
Advanced
programming menu
level
1. Press the P button and the  button in the status level
at the same time for more than 1 s.
» The display switches from time to the three flashing
digits "000", preceded by a "C".
2. Press the

or the

button to select code 113.
3. Press the P button to confirm your selection.