Grifo SEP 40, User Manual

Page: 87 / 118

ITALIAN TECHNOLOGY
grifo ®
Page 77
SEP 40 Rel. 3.10
CONTROL PROGRAM COMMANDS
The following is a list of all the commands available with Windows version of control program. The
command name is matched with is keyboard shortcut (if present) and a brief descripion of its purpose
and employ modalities. Please remember that the most recently updated instuctions list for the
control program is always the on line help, which should be consulted before this manual.
File
This submenu is used for source files manipulation, settings and viewing directory, changes drives,
changes start and finish address of buffer for loading and saving files by binary, MOTOROLA,
MOS Technology, Intel (extended) HEX, Tektronix, ASCII space, JEDEC, and POF format.
File / Load
Analyse file format and loads the data from specified file to the buffer. You can choose the format
desired (binary, MOTOROLA, MOS Technology, Tektronix, Intel (extended) HEX, ASCII
space, JEDEC and POF). The control program stores a last valid mask for file listing. You can
save the mask into the config. file by command Options / Save options.
Checking the check box Automatic file format recognition tells program to detect file format
automatically. When program can’t detect file format from one of supported formats, the binary
file format is assumed.
When the check box Automatic file format recognition is unchecked program allows user to
manually select wished file format from list of available file formats on panel Selected file
format. When Binary file format is selected, there can be specified Buffer start value. Buffer start
value is buffer address from which data read from file will be written to buffer.
The reserved key <F3> will bring out this menu from any menu and any time.
File / Save
Saves data in the buffer, which has been created, modified, or read from a device onto a specified
disk. You can choose the format desired (binary, MOTOROLA, MOS Technology, Tektronix,
Intel (extended) HEX, ASCII space, JEDEC and POF).
The reserved key <F2> will bring out this menu from any menu and any time.
File / Load project
This option is used for loading project file, which contains device configuration buffer data saved
and user interface configuration.
The standard dialog Load project contains additional window - Project description - placed
at the bottom of dialog. This window is for displaying information about currently selected