Greyp G6-02, User Manual, Page: 27 / 232

BIKE MAINTENANCE & RANGE
25
ENGLISH
4
Bike maintenance & range
Maintenance
WARNING — Failure to follow the instructions in this section may result in damage, serious
personal injury or death. If your bike exhibits any signs of damage, do not use it and
immediately bring it to your authorized Greyp Bikes retailer for inspection.
All regular maintenance, troubleshooting, repair and parts replacement must be performed
by an authorized Greyp retailer.
WARNING — I f your use of a bicycle applies more stress than that which is intended, the bi-
cycle or its parts can be damaged or broken. A bicycle that has damage could decrease your
control and cause you to fall. Do not ride in conditions that apply more stress than the limits
of the bicycle. If you are not sure of the limits of the bicycle, consult your bike shop.
Great care should be taken to not damage carbon fibre or composite material. Any damage
may result in a loss of structural integrity, which may result in a catastrophic failure. This
damage may or may not be visible on inspection. Before each ride, and after any crash, you
should carefully inspect your vehicle for any fraying, gouging, scratches through the paint,
chipping, bending, or any other signs of damage. If discovered, do not ride any further and take
your Greyp bike to an authorized Greyp retailer for a complete inspection.
The lifespan and type and frequency of maintenance depend on many factors, such as
frequency and type of use, rider weight, riding conditions and/or impacts. Additionally, the
Greyp bike uses a power-assisted drive system, which means more distance at different rates,
depending on the component. The drivetrain and brake components are especially subject to
wear. Have your authorized greyp retailer inspect your vehicle and components periodically.
Exposure to harsh elements, especially salty air (such as riding near the ocean or in the
winter) can result in galvanic corrosion of components, which can accelerate wear and
shorten the lifespan of your bike. Dirt can also accelerate the wear of surfaces and bearings.
The surfaces of the bike should be cleaned before each ride. Proper care and regular
maintenance can help increase the longevity of components. If you notice any signs of
corrosion or cracking on the frame or any component, the affected item must be replaced.
While riding, listen for any creaks, as a creak can be a sign of a problem with one or more
components. Periodically examine all surfaces in bright sunlight to check for any small