Greyp G6-02, User Manual, Page: 24 / 232

BATTERY AND CHARGER
22
ENGLISH
During the charging process, the light on the charger will glow red. When the battery is fully charged,
the light on the charger will turn green. When monitoring the charging process, please check the LED
light on the charger.
When charging is complete, disconnect the charging plug from the battery socket. Unplug the
charger from the wall socket.
Make sure that the input voltage of the charger is in range of the power grid voltage you plan to use.
If the battery was left plugged in to the charger after reaching 100% SoC, the charging will stop. It can
only be resumed by unplugging and plugging in the charger again.
CAUTION — If the red LED light is flashing during the charging process, a charging error has occurred.
In that case, immediately remove the charger from the socket, discontinue the use of the motor
support and contact an authorized Greyp retailer.
CHARGER2 (EU ONLY)
Model: STC-8150LC
Input: 220-240 V AC, 50/60 Hz, 180 W
Output (nom): 36 V DC, 4 A
CHARGER 1
Model: BC222360040
Input: 100-240 V AC, 2.5 A (max), 50/60 Hz
Output (max): 42 V DC, 4 A
LED indicator
LED indicator