Greyp G6-02, User Manual, Page: 129 / 232

INTRODUCTION
11
ENGLISH
EU SPECIFICS
RADIO FREQUENCY BAND MAXIMUM RADIO-FREQUENCY POWER
1 EGSM900 35 DBM
2 GSM1800 32 DBM
3 GSM 900 8-PSK 30 DBM
4 GSM 1800 8-PSK 29 DBM
5 LTE FDD BD1, BD3, BD7, BD8, BD20 25 DBM
6 UMTS WCDMA FDD BDI, BDIII, BDVIII 25 DBM
7 WIFI 4.9 GHZ TO 5.8 GHZ 18 DBM
8 WIFI 2.4 GHZ TO 2.5 GHZ 18 DBM
9 BLUETOOTH 2.4 GHZ 12 DBM
USA SPECIFICS
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Contains FCC IDs: QIPPLS8-USR4, Z64-WL18SBMOD
NOTE — This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
»
Reorient or relocate the receiving antenna;
»
Increase the separation between the equipment and receiver;
»
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
»
Consult the dealer or an experienced radio/TV technician for help.
CAUTION - Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.