Grecom PSR-300 Owner'S Manual Download Page 53

Page: 53 / 64

Notes:

• If you made a mistake in Step 4,

Invalid ID value

appears and the scanner

beeps when you press

ENT

. Start again at Step 3.

• You can enter either a decimal or AFS code for ED (EDACS) IDs. The default

setting is decimal ID entry. When you press

FUNC

then

AFS Format

ap-

pears for about 2 seconds. Now you can enter the ID code with AFS format.

If you entered an ID code that is already stored in same bank’s ID channel,

Dupl. ID of X-XX

appears. If you want to store the ID code, press

ENT

. To cancel

the operation, press

Talk Group ID Hold

You can set your scanner to follow a trunking signal that you want to track

during scanning. While the scanner is stopped on a voice channel (

ap-

pears), hold down

TRUNK

until

ID hold ON.

appears.

When ID hold is activated and the scanner receives a voice channel, the scan

indication

at the first digit in the top line changes to

To release ID hold, press

SCAN

TRUNK

Turning an ID Sub-Bank On or Off

Follow these steps to turn the ID sub-bank on or off during the program mode:
1 Press

TRUNK

repeatedly to select the desired sub-bank.

2. Press

FUNC

then

to turn the sub-bank on if it is off or off if it is on.

Follow these steps to turn the ID sub-bank on or off during the scan mode.

Note:

This function activates when the receiving channel bank is closed

mode.

1. Press

FUNC

while the scanner is stopped on a voice channel transmission.

2. Press

TRUNK

. The display indicates which sub-bank is turned on or off. The

active sub-bank number appears.

3. Press

FUNC

and the number of the sub-bank you desire to turn on or off.

For example to turn sub-bank 4 on or off, press

FUNC

. Then press

Locking Out Talk Group IDs

1. Press

PGM

Note:

You can only lock out talkgroup IDs when the scanner is in the closed

mode (see “Open and Closed Modes”).
2. Press

TRUNK

3. Press

FUNC

, or to move to the desired bank.

Summary of Contents for PSR-300

































































Search results

Summary of Contents for PSR-300

Reviews:

Related manuals for PSR-300

Brands by name

Popular brands

Grecom PSR-300, Owner'S Manual

Search results

Summary of Contents for PSR-300

Reviews:

Related manuals for PSR-300

Brands by name

Popular brands