Grecom PSR-300 Owner'S Manual Download Page 44

Page: 44 / 64

Press

FUNC

and then

ATT

to set the attenuator to its global mode.

Global ATT.

appears for 2 seconds at the bottom line and

appears. Press

ATT

to turn the

attenuator on or off. When attenuator is off while global attenuator mode,

appears on the display.
Press

FUNC

and then

ATT

again to turn off the global attenuation mode.

Nor-

mal ATT.

appears on the bottom line for about 2 seconds, then

disappears.

Notes:

• Default setting of this scanner’s attenuator is global mode and it is set to off.
• If you turn on the attenuator, the scanner might not receive weak signals.

Turning the Key Tone On and Off

Each time you press any of the scanner’s key’s, the scanner sounds a tone. To

turn the scanner’s key tone off or on:
1. If the scanner is on, turn

OFF/VOL

counterclockwise until it clicks to turn the

scanner off.

2. Turn

OFF/VOL

clockwise to turn the scanner on.

Welcome to Scanning

Receiver

appears.

3. While

Welcome

message appears, press

to turn on the key tone or

turn it off.

Using the Display/key Backlight

Your PSR-300 features a backlit keypad and display for easy viewing and use

in dark environments. There are three backlight modes you can choose from

to control backlight activation, Normal mode, Keypress mode, and first keypress

Ignore mode.
With Normal mode, simply press to activate the backlight. The backlight will

activate and remain on for the factory default setting of 5 seconds. The back-

light continues to remain on while you are operating the keypad. To turn off the

backlight before it automatically turns off, press again.
With Keypress mode, the backlight will light automatically when you press any

key on the keypad, and function as described above in Normal mode. This

mode is useful if you want the backlight to come on automatically when you

perform an operation using the keypad.
With Ignore mode, the backlight functions as described in Keypress mode,

except that the scanner ignores the first keypress. This mode is useful when

you wish to quickly illuminate the display and keypad without having to search

of the key. The first keypress is ignored, and the scanner sounds the low

pitched error beep to remind you that the first key pressed to activate the back-

light is ignored by the scanner.

Summary of Contents for PSR-300

































































Search results

Summary of Contents for PSR-300

Reviews:

Related manuals for PSR-300

Brands by name

Popular brands

Grecom PSR-300, Owner'S Manual

Search results

Summary of Contents for PSR-300

Reviews:

Related manuals for PSR-300

Brands by name

Popular brands