24
Storing Trunking Frequencies into Channels
1. Press
PGM
and
FUNC
then or to select the desired bank to program.
2. Press
TRUNK
to enter into trunking mode.
3. Repeatedly press
MODE
to select Motorola, EDACS, or LTR.
4. Press
PGM
and select the channel number using or .
5. Enter the trunking frequency and press
ENT
.
6. Repeat Steps 4 and 5 to enter the other trunking group frequencies for EDACS
or additional control channel frequencies for Motorola systems.
7. If necessary, press
MODE
to change the receiving mode.
Storing Text Tags
You can customize your scanner by storing text tags (up to 16 characters) for
easy identification of channel transmissions, trunk IDs, or banks.
Assigning a Text Tag to a Channel
1. Press
MAN
, enter the channel number where you want to enter the text,
then press
MAN
again.
M
and the bank and channel number appear at the
2
nd
line of the display (for example:
M100
).
2. Press
PGM
.
M
changes to
P
.
3. Press
TEXT
. The cursor appears at the fourth line.
4. Enter the text using the numeral keys (see “Text Input Chart”).
Note:
If you make a mistake, press or to move to the character you want
to change.
For example, to identify amateur (ham) radio transmissions in the 6 meter range,
input “HAM 6m” as follows:
• “H” is the second letter associated with 4 on the keypad. Press
4
then
2
.
• “A” is the first letter associated with 2 on the keypad. Press
2
then
1
.
• “M” is the first letter associated with 6 on the keypad. Press
6
then
1
.
• A space is entered by pressing •
/DELAY
.
• “6” is the sixth number associated with 1 on the keypad. Press
1
then
6
.
• “m” is the first letter associated with 6 on the keypad. Press
6
and
FUNC
(for
the lowercase set), then press
1
.
5. Press
ENT
to input the text.
