SWPR Menu Reference
The SWPR menu is used when creating new Spectrum Sweeper
objects, or editing existing Spectrum Sweeper objects. All menus
are shown in the scanner
!
s display as a three line window that
can be scrolled up or down to access the various different
parameters. The active parameter is always the middle
parameter and is indicated by a flashing “
:
”. The entire SWPR
menu is shown below:
SWPR
Parameter
Options
Description
Tag
Alpha-
numeric
text
The alphanumeric display name for the SWPR
search. Use the standard text entry method or
QTXT to name the object.
Type
All Bands
or Pub
Safety
Use
!"
to select All Bands or Public Safety. All
Bands covers the entire frequency range of the
scanner. Public Safety covers frequency ranges
commonly used for public safety
communications.
Sub-bands
!"
,
SEL
Sub bands are available when using SWPR in All
Bands or Public Safety mode. In All Bands, the
sub bands are defined as follows:
"
0: 25-54 MHz
"
1: 108-137 MHz
"
2: 137-174 MHz
"
3: 216-300 MHz
"
4: 300-406 MHz
"
5: 406-470 MHz
"
6: 470-512 MHz
"
7: 806-869 MHz
"
8: 896-960 MHz
"
9: 1240-1300 MHz
In Public Safety, the sub bands are defined as
follows:
"
0: 33.4-46.5 MHz
"
1: 151-170 MHz
"
2: 453-467 MHz
"
3: 764-806 MHz
"
4: 851-869 MHz
"
Scan Lists
On or Off
for Scan
Lists 1-20
Sets membership in Scan Lists. Use
!"
keys to
scroll through scan lists. Use
SEL
key to toggle
Scan List membership.
Delay
On or Off
Controls whether a Delay is used to wait for reply
traffic after a transmission on the SWPR search.
0715 User Manual
"
Page 82