TGRP Menu Reference
The TGRP menu is used when creating new Trunking Talkgroup
objects, or editing existing Trunking Talkgroup objects. All menus
are shown in the scanner
!
s display as a three line window that
can be scrolled up or down to access the various different
parameters. The active parameter is always the middle
parameter and is indicated by a flashing “
:
”. The entire TGRP
menu is shown below:
TGRP
Parameter
Options
Description
TSYS
New or
previously
stored
trunking
system
object
(TSYS)
To enter a new trunking system, use the
!"
keys to scroll through the stored systems until
NEW
appears, then press
SEL
to enter the
parameters for the new TSYS. To use a trunking
system that you have previously entered, use the
!"
keys to scroll to the desired system.
ID
Decimal,
hex or AFS
depending
on TSYS
type
The digital address of the talkgroup or individual
radio ID on the trunked radio system.
Type
Group or
Private
Use Group for talkgroup ID, Private for individual
radio ID.
Tag
Alpha-
numeric
text
The alphanumeric display name for the TGRP.
Use the standard text entry method or QTXT to
name the object.
Scan Lists
On or Off
for Scan
Lists 1-20
Sets membership in Scan Lists. Use
!"
keys to
scroll through scan lists. Use
SEL
key to toggle
Scan List membership.
Delay
On or Off
Controls whether a Delay is used to wait for reply
traffic after a transmission on the TGRP.
Delay Time
1-200 x
100 mS
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay is
On, e.g., 20=2 seconds.
L/Out
On or Off
Permanent lockout for the TGRP. Also accessed
by pressing
FUNC L/OUT
while the scanner is
stopped on the TGRP object.
Priority
On or Off
Turns Priority Mode on or off for the TGRP
object.
LED Flash
Solid or
Flash
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
0715 User Manual
"
Page 73
