Scroll down in the object
!
s parameters menu to the
Scan
Lists:
field. With the
Scan Lists:
field highlighted, use the
"
on the 5-way pushbutton pad to scroll through the Scan Lists,
and use the
SEL
button to toggle membership for a Scan List on
or off. The asterisk (
*
) next to the Scan List number indicates
that the object is a member of that Scan List. Press the
Save
softkey to save the modified object.
Enabling and disabling Scan Lists
Scan Lists may be enabled or disabled while actively scanning,
or by accessing the individual Scan List in the Global Settings
(
GLOB
) menu.
To toggle a Scan List
!
s enabled/disabled status while scanning,
press the numeric key that corresponds with the Scan List you
wish to toggle. For example, pressing
4
while scanning will
toggle the state of Scan List 04 from enabled to disabled, or vice
versa if the Scan List is already disabled. To toggle the enabled/
disabled status for Scan Lists 11-20, press
FUNC
, then press a
number key, i.e., press
FUNC 3
to toggle the status of Scan List
13. If you enable a Scan List that has no assigned objects, the
number for that scan list will flash in the display while the
scanner is scanning.
For example, when Scan Lists 1, 2, 3 and 16 are enabled, the
display will appear as follows while scanning:
To toggle a Scan List
!
s status from the Global Settings menu,
press
PGM
to enter Program Mode, then press the
GLOB
softkey.
Scroll down to the
Scan Lists:
item and press the
SEL
key on
the 5-way pushbutton pad. Scroll to the Scan List you wish to
change and press the
SEL
key again, then at the Enabled:
setting press the
!
or
"
on the 5-way pushbutton pad to toggle
the Scan List on or off. Press the
SAVE
softkey to save settings
for that Scan List, then press
SAVE
again to confirm your global
changes and exit the GLOB menu.
0715 User Manual
Page 40
