Once your LMIT object is saved, you can use it while scanning,
or launch the LMIT search by itself by pressing the
SRCH
softkey
after navigating to the LMIT object in Manual Mode.
When the LMIT search stops on an active frequency, the display
will appear as follows:
HINT:
It can take some time for the 0715 to process all of the
frequencies in a LMIT search. You can experiment with different size
frequency ranges to find a LMIT search setup that does not interfere
excessively with scanning of other object types.
Spectrum Sweeper Object (SWPR)
A Spectrum Sweeper Object (SWPR) is a record that stores the
parameters necessary for the radio to rapidly sweep a range of
frequencies for strong signals from nearby transmitters. A SWPR
object can be used for standalone operation – the radio just
sweeps and stops when activity is detected, or for sweeping that
is performed while the radio is scanning. The radio treats SWPR
objects just like any other Scannable Object when in Scan Mode.
If you create a SWPR object, assign it to a Scan List and press
the
SCAN
key, the radio will check for activity on all the enabled
Scannable Objects – TGRP objects, CONV objects, LMIT objects
and SWPR objects. An example of when this might be handy
0715 User Manual
Page 33
