Great Wall Florid, Service Manual

Page: 267 / 281

GWFLORID Maintenance Manual 260
2. Remove the nut and gasket.
Screw off the hexagon nut for flange face from the rear bum-
per left & right side central mounting bolt, and the rubber
cushion of the rear bumper left & right side central mounting
bracket.
3. Remove the expansion button connecting the left &
right side bracket below the rear bumper and vehicle
body.
4. Remove the bumper mounting bolt.
Screw off the rear bumper mounting bolt connecting the left
& right side above the rear bumper and vehicle body.
5. Pull the bumper out.
Pull the rear bumper out of the left & right side bracket of
the rear bumper, and make the central part of the rear bum-
per slide out along the rear bumper central mounting bracket
bolt.
6. Remove the three rear bumper plastic buffer anchor
from the rear impact beam.
Rear bumper body
Rear bumper body
Rear bumper body
Rear bumper body
Rear bumper
Rear bumper plastic buffer anchor
Central left mounting
bracket of the rear bumper
Rear mounting bracket
LH of the rear bumper
Front mounting bracket
LH of the rear bumper
Rear bumper central
mounting bracket bolt
Rear bumper mounting bolt
Expansion button
Hexagon nut for flange face
Rubber cushion of the
rear bumper central
mounting bracket