Great Wall Florid, Service Manual

Page: 109 / 281

GWFLORID Maintenance Manual 102
Parking Brake Control Mechanism Assembly
Components
Parking brake lever removal and installation
1. Removal
(a) Remove the auxiliary facia console, and pull the park-
ing brake lever to the lowest position.
(b) Remove the two hexagon head bolts used to stablize
the parking brake lever onto the vehicle floor.
(c) Loosen the parking brake cable's adjusting nuts with a
wrench, and take the cable out from the equalizing frame.
2. Installation
Complete the parking brake control mechanism's installation
by reversing its removal sequence. Please pay attention to
the items below:
(a) The open end of the parking brake lever assembly's
cable clamp should face down.
(b) While installing the parking brake lever, the assembly
structure must be properly adjusted, which is usually 5
to 8 gears.
(c) The tightening torque of the coupling bolt for the
parking brake control mechanism assembly and vehicle
body is 20 N·m.
A
B
C
D
Q1420612
Q1460825
Q32006
Q1420616
Parking brake control mechanism assembly
Q1420612
A
B
C D
Left parking brake cable assembly
Right parking brake cable assembly
Button
control lever
Control jacket
Dust cover
Lock nut
Lock nut
Switch assembly
Adjusting nut
Equalizing frame
Pull rod