Great Wall Florid, Service Manual

Page: 274 / 281

267 Vehicle Body
Rear seat removal and installation
Removal
1. Remove the mounting bolts (5) on the
40% of the rear seat backrest (3).
2. Remove the mouting bolts (6) on the
60% of the rear seat backrest (4).
3. Lift the rear seat cushion up and make
hook 11 slide out of clamping frame 9.
4. Continue to lift the seat cushion up, and tilt it upwards
to make hook 12 behind seat cushion slide out of the
rear seat fixed cross member hook 13. Finally, remove
the rear seat cushion.
Remarks: Mounting bolt (2) refers to the rear seat backrest (1)
mounting bolt.
Installation
Special Note: Different metals making direct contact
will accelerate corrosion. Make sure to use the correct
fastening piece to avoid premature corrosion.
1. Hang hook 12 behind the seat cushion on the fixed
cross member hook 13, and then press the hook under
the cushion into clamping frame 9.
2. Install the rear fixed cross member (7) and mounting
bolt (8) of the rear seat on the vehicle body.
3. Install the mounting bolts (6) of the 60% rear seat
backrest (4).
4. Install the mounting bolts (5) of the 40% rear seat
backrest (3).
1
2
3
4
5
6
7
8
9
10
9
2
1
5
6
8
8
11
12