Great Wall Florid, Service Manual

Page: 136 / 281

129 Brake System
(b) Apply a small amount of lithium grease on the brake
leading shoe assembly and brake trailing shoe assembly
(refer to the arrows in the diagram for indicated areas).
Remark: Do not contaminate the friction plate.
(c) Insert the return spring into the adjusting clearance
screw rod and apply an appropriate amount of lithium
grease on the adjusting clearance wheel's thread and
screw, adjusting clearance screw rod's shaft head,
and adjusting clearance shaft's shaft head (refer to the
arrows in the diagram for locations).
4. Install the brake lever on the brake trailing shoe as-
sembly.
(a) Install the parking brake lever and insert the lever rotat-
ing shaft.
(b) Use pliers to install a new split ring in the lever rotating
shaft.
5. Install the return spring and ratchet adjuster assembly
on the brake leading shoe assembly and brake trailing
shoe with brake lever assembly.
Hang one side of the return spring on the brake leading shoe
assembly, and use pliers to hang the other side of the return
spring on the brake trailing shoe with brake lever assembly.
6. Install the adjusting paddle on the brake leading shoe
assembly.
(a) Install the adjusting paddle on the brake leading shoe
assembly.
(b) Use needle nose pliers to install the brake shoe tension
spring on the adjusting paddle and brake leading shoe
assembly.