Great Wall Florid, Service Manual

Page: 118 / 281

111 Brake System
ABS trouble code list
Trouble code Fault description
C0035 Front wheel speed sensor LH circuit failure, velocity failure
C0040 Front wheel speed sensor RH circuit failure, velocity failure
C0045 Rear wheel speed sensor LH circuit failure, velocity failure
C0050 Rear wheel speed sensor RH circuit failure, velocity failure
C0060 Front ABS outlet solenoid valve LH failure
C0065 Front ABS inlet solenoid valve LH failure
C0070 Front ABS outlet solenoid valve RH failure
C0075 Front ABS inlet solenoid valve RH failure
C0080 Rear ABS outlet solenoid valve LH failure
C0085 Rear ABS inlet solenoid valve LH failure
C0090 Rear ABS outlet solenoid valve RH failure
C0095 Rear ABS inlet solenoid valve RH failure
C0110 Pump motor circuit failure, operational error
C0121 Solenoid valve relay circuit failure
C0161 Brake switch circuit failure
C0245 Wheel speed sensor frequency error, wheel speed sensor signal failure
C0287 Acceleration sensor failure
C0550 ECU failure
C0800 Voltage fault, voltage too high or too low
C0232 Warning lamp positive short circuit, warning lamp ground short circuit
should also be removed from the ECU.
(d) Do not let oil contaminate the ECU. Be especially careful of the ECU terminals, otherwise it might obstruct
the connection among terminals of the wire harness plug.
Note: The BOSCH ABS8.0 hydraulic pressure unit (integrated into the ECU) is not serviceable. If
damaged, the whole unit must be replaced.