M10 JEWEL Machine - Electronic Engraving Machine
. 6
First Contact
Presentation
Introduction
Thank you for purchasing the
M10 JEWEL
machine and for your confidence in our knowledge in the field of the engraving.
Thanks to its innovative design and with its performance results, the
M10 JEWEL
machine combines flexibility and full
featured performance without sacrificing simplicity, ease of use, or ease of maintenance.
To begin with, we highly recommend that this entire manual be read before attempting
to use the
M10 JEWEL machine. The manual includes important information about safety,
assembly, use, and maintenance of the M10 JEWEL machine
.
The machine m ust never be handled without an adult present. Keep the machine,wires
and cables out of children’s reach.
The
M10 JEWEL engraving machine is a high performance machine :
All dispositions contributing to the safety of use must imperatively be respected.
Contra-indications
This machine is only designed for inside and outside engraving bracelets or rings and
must never be used for other applications.
Do not use this machine in explosive environment.
This machine is only designed for one user. Do not let several people use the machine
simultaneously.
• If the machine is not to be used for a long period, unplug the electricity supply and cover the machine (packaging,
cover, lid...)
• Do not move the engraving head by hand unless mechanical block of the machine as described in the paragraph
"Mechanical block" of this manual's "Installing" chapter.
• Do not spill any liquids onto the machine (drinks, cleaning fluids…) unless when recommended by
GRAVOTECH MARKING SAS (example : lubrication).
• The machine should never be used with anything other than Gravograph accessories and tools.
• Never hold the material to be engraved in your hands. Only use the Gravograph clamping systems designed for your
machine.
• Make sure that the material is well clamped before starting to engrave.
• Do not take the engraving material out of the machine during engraving.
• If the engraving must be stopped, use the function key provided for this purpose on the keyboard of the machine.
To avoid any risks of being crushed by the machine during engraving, stay clear of the
chuck and the diamond tip.
