M10 JEWEL Machine - Electronic Engraving Machine
. 10
First Contacts
Description
The
M10 JEWEL
machine is a machine for engraving bracelets, wedding rings and rings.
It has a keyboard for controlling the machine.
Files to be engraved are transferred from the computer to the machine by the intermediary of a cable which is plugged into
the USB port on the
M10 JEWEL
machine.
The actual engraving process is controlled by a diamond tip.
The object to be engraved is held in place by 3 jaws (j1) fitted onto the chuck (J) with concentric fastening (consult your
GRAVOGRAPH dealer to find out about the various types of jaws available).
The M10 JEWEL machine cover a maximum engraving surface area of 9.8"x 0.6"
(250 x 15 mm).
Front view of the machine
Engraving table
A. Base
B.
Control panel (flexible 9-key control keyboard)
D.
Accessories drawer
E.
Location for the
outside engraving diamond tips
J.
Chuck (concentric fastening)
K.
Tightening ring
Chuck
J1. Location for 3 jaws
J2. Location for the
inside engraving diamond tips
J3. Directional arrow
